DIN verification means confirming, against Ministry of Corporate Affairs (MCA) records, that a person's Director Identification Number is real, belongs to them and is in good standing. To check one person yourself, open mca.gov.in, go to MCA Services, then FO Services, and use Enquire DIN Status (enter the DIN and the captcha), then Verify DIN PAN Details of Director to confirm the DIN matches their PAN. The catch: both screens need the DIN first. If you hire senior people regularly, SpringVerify's DIN Verification starts from the candidate's PAN instead, finds any DIN linked to it, and lists every company and LLP where MCA records them as a director, in 0 to 2 working days.
Picture the offer letter for your new finance head sitting in your outbox. Their CV lists two employers and no board seats. One DIN check later, you could know whether that is the whole story, before day one rather than after it.
Two different government numbers share the letters DIN. This guide covers the Director Identification Number, which MCA issues to company directors and LLP designated partners. If you are holding a GST or customs notice, the DIN on it is a Document Identification Number from the Central Board of Indirect Taxes and Customs (CBIC), which you verify on CBIC's own DIN Search page. It tells you nothing about a person's directorships.
A Director Identification Number is the unique number the Central Government allots to a person before they can become a director of an Indian company. Section 152(3) of the Companies Act, 2013 says no one can be appointed a director without it, and section 155 says no one who already has a DIN may apply for, obtain or hold another. LLPs use the same number for designated partners, which is why MCA's own service is titled "Verify DIN/DPIN-PAN Details of Director/Designated Partner".
That one-person, one-number rule is what makes DIN verification useful in hiring. Find the DIN and you have a key to every directorship that person holds in India. And there can be a lot of them: section 165 allows up to 20 directorships at the same time, of which up to 10 can be public companies. A candidate can be a genuine full-time employee and still sit on several live boards.
HR teams care for three plain reasons:
You check a DIN on mca.gov.in through two FO Services screens: Enquire DIN Status for the status, and Verify DIN PAN Details of Director to tie the DIN to a PAN. Here is the full routine, with the candidate's consent in hand first.
Before you start, have ready:
Steps:
Step 4 is where the manual route runs out of road. MCA lets you confirm what the candidate tells you. It does not easily show you what they left out, because every screen starts from a DIN or a company you already know about.
The status shown on Enquire DIN Status tells you whether the person can act as a director today. "Approved" is the one you want. Everything else needs a short conversation, and only a disqualification is a hard stop for a board role.
| Status or flag | What it means | What HR should do |
|---|---|---|
| Approved | The DIN is active and in good standing. | Proceed. Still match the DIN to the PAN and compare the directorships with the CV. |
| Provisional | MCA flagged the application as a possible duplicate and its DIN cell is still reviewing it. A person with a provisional DIN cannot sign as a director or be named in e-forms. | Do not appoint them to a board until the DIN is approved. Ask why the application was flagged. |
| Deactivated due to non-filing of DIR-3 KYC | The director missed their KYC filing. It is an administrative lapse, not a disqualification. MCA allows the "Reactivation of DIN" option only for this status, through Form DIR-3-KYC-WEB. | Ask the candidate to file DIR-3-KYC-WEB and send you the updated status, especially before any board appointment. |
| Disqualified under section 164 | The person cannot be appointed a director for the period the Act sets. Under section 164(2), a director of a company that has not filed financial statements or annual returns for three continuous financial years, or has defaulted on deposits or debentures for a year or more, cannot be re-appointed there or appointed in any other company for five years from the default. Under section 167, they also lose their other directorships except in the defaulting company. MCA publishes lists of directors disqualified under section 164(2)(a). | Do not appoint them to your board in that window. For a non-board role, ask what happened at the defaulting company before you decide. |
| No DIN found, or DIN and PAN don't match | Either the person has never been allotted a DIN, or the number you were given belongs to someone else. | Ask the candidate to recheck. A wrong DIN given on purpose is a far bigger issue than a missing one. |
The DIN KYC rule changed in 2026. If you have read that directors must file DIR-3 KYC every year by 30 September, that rule has gone. MCA amended rule 12A of the Companies (Appointment and Qualification of Directors) Rules, 2014 by notification G.S.R. 943(E) dated 31 December 2025, effective 31 March 2026. Directors now file KYC once every three consecutive financial years, by 30 June. Directors who had completed KYC are next due by 30 June 2028. So a "Deactivated due to non-filing of DIR-3 KYC" status is something the candidate can fix with one form, DIR-3-KYC-WEB.
On MCA, not easily. MCA's Verify DIN PAN Details screen confirms whether a DIN and a PAN match, but you need the DIN to use it. If the candidate leaves the DIN off your form, or says they have none, the manual route stalls.
This is the gap SpringVerify's DIN Verification closes. You send the candidate's PAN and their consent. SpringVerify finds any DIN linked to that PAN in MCA records, then returns the companies and LLPs linked to that DIN. The candidate never types in a DIN, so leaving a board seat off the form does not keep it out of the result. A "no DIN found" result is also meaningful: since a DIN is required before any director appointment, it usually means the person has never been a director of an Indian company or a designated partner of an LLP.
If you only have a name, SpringVerify's Directorship Check searches MCA director records using the name on the candidate's PAN, in both name orders. Because names repeat, a hit there is treated as a possible match to discuss, never graded Discrepant.
Treat a DIN result as the start of a conversation. Most directorships are harmless: a family company, a friend's startup, a dormant entity from years ago. What matters is whether the result matches what the candidate told you and whether any role clashes with the job.
Questions that settle most cases quickly:
Then decide under your written BGV policy, the same way for everyone in that role. SpringVerify gives the candidate 30 days to dispute a finding through its portal, and a corrected finding goes into an updated report with the dispute logged.
A DIN check covers directorships and designated partnerships recorded with MCA. It does not show sole proprietorships, plain shareholdings with no board seat, or board roles abroad, because none of those need an Indian DIN. Ask senior candidates to declare all of these on your BGV form.
A DIN check is also not a criminal check. Section 164(1) disqualifies people with certain criminal convictions from directorships, but you will only learn about a case from court records. That is why leadership hires usually pair a DIN check with a court record check, which SpringVerify runs across India's digitised eCourts records in 1 to 2 hours, plus a credit or economic default check for anyone with signing authority.
Run a DIN check for any role where an undisclosed board seat could create a conflict or a legal problem. Skip it for entry-level volume hiring, where the standard checks cover the risk.
| Role | Run a DIN check? | Why |
|---|---|---|
| CXO, business head, board member | Always | Board appointments need a valid DIN, and side directorships are common at this level. |
| Finance, legal or procurement with signing authority | Yes | Directorships at suppliers or customers are the classic conflict. |
| Founder or ex-founder joining as an employee | Yes | Their old company may still be live, filing or in default. |
| Senior sales, partnerships, mid-senior managers | Usually | Side companies in the same market are worth knowing about. |
| Entry-level and high-volume roles | Rarely | The standard checks in an employee background check cover these roles. |
Yes. Ask for written consent that names the DIN check and why you are running it, even though the MCA data itself is public. SpringVerify runs DIN Verification only with the candidate's written consent, as part of its standard consent process.
The Digital Personal Data Protection Act, 2023 sets the wider rules. The government notified the DPDP Rules, 2025 in November 2025 with an 18-month phased compliance timeline, so from 13 May 2027 employers acting as data fiduciaries must give standalone, clear consent notices that explain the specific purpose for collecting personal data such as a candidate's PAN. Building that consent step into your BGV form now saves a rework later. For a specific case, take legal advice.
SpringVerify runs a DIN check from the candidate's PAN and consent, and files a graded result next to their other checks. The MCA portal works when you are checking one director whose DIN you already have. It gets slow when you are hiring ten senior people a quarter and each one needs a DIN, a PAN match, a company search and a screenshot trail. SpringVerify turns that into one request per candidate.
| MCA portal, done yourself | SpringVerify DIN Verification | |
|---|---|---|
| What you need to start | The candidate's DIN | The candidate's PAN and consent |
| Finds directorships the candidate didn't declare | Only if you already know the company or DIN | Yes, it lists every company and LLP linked to the DIN found from the PAN |
| Turnaround | As fast as you can work the portal | 0 to 2 working days |
| Who reviews it | You | SpringVerify's operations team reviews and grades every result |
| Where the result lives | Screenshots in a folder | An audit-ready report in the SpringVerify dashboard, next to the candidate's other checks |
| Best for | A single board appointment | Every leadership and senior hire |
The DIN check sits on the same platform as the rest of your background verification: 20+ verification types, one dashboard, and integrations with more than 100 HRIS, ATS and HR platforms, used by 8,000+ companies. Basic checks come back in under 60 seconds, and 80% of verifications finish within 48 hours.
It holds up when hiring speeds up. WazirX, the Indian crypto exchange, came to SpringVerify expecting 30 to 50 hires and ended up hiring 250+ in the same period, at times rolling out 10 to 15 offers a week. SpringVerify set its account up within a week, and WazirX built its package around Court Check and Credit Check for every new hire, the same pair that belongs next to a DIN check for money-facing roles. Read the WazirX case study.
Edureka's onboarding team runs its background verification on SpringVerify. Anamika Sharma, Human Resources Specialist at Edureka, explains why the checks matter: "When we onboard someone into a firm, they work closely with other departments/teams and are often entrusted with resources and sensitive information."
SpringVerify is ISO/IEC 27001:2022 and SOC 2 Type II certified, so candidate PANs and reports sit in an audited system rather than a shared drive.
It's a good fit if:
It's not the right tool if:
Pick SpringVerify if you want every senior hire's directorships found from a PAN, graded and filed before the offer goes out, so a board seat at a rival never surprises you after day one.
Next step: see what the report includes and set it up on SpringVerify's DIN Verification page.
Go to mca.gov.in, open MCA Services, then FO Services, and choose Enquire DIN Status. Enter the DIN and the captcha to see its status. To confirm the DIN belongs to a specific person, use Verify DIN PAN Details of Director with their DIN and PAN.
Not directly on MCA, because the Verify DIN PAN Details screen needs the DIN first. SpringVerify's DIN Verification starts from the candidate's PAN, finds any DIN linked to it and lists the companies and LLPs linked to that DIN, with the candidate's consent.
The director missed a KYC filing with MCA. It is not a disqualification. The director can reactivate the DIN by filing Form DIR-3-KYC-WEB. Since 31 March 2026, DIN KYC is due once every three financial years instead of every year.
No. Section 155 of the Companies Act, 2013 says anyone already allotted a DIN may not apply for, obtain or hold another. Section 159 sets a penalty of up to ₹50,000, plus up to ₹500 a day while the default continues.
Up to 20 companies at the same time under section 165 of the Companies Act, 2013, of which no more than 10 can be public companies. That is why a full-time candidate can still hold several live directorships.
No. The DIN on a GST or customs notice is a Document Identification Number issued by CBIC to authenticate tax communications. A Director Identification Number is issued by MCA to company directors and LLP designated partners.
Typically 0 to 2 working days. If the data source is delayed, the check is paused and resumed once it is available, and every result is reviewed and graded by SpringVerify's operations team.
.png)